EN
CN
Home>Products

Fused Silica Modular Block for Coke Oven

Online consultation
Features Specification
Features

service life of ovens Quick installation,no pre-heating required,less interruption to production;less Joints,extend the

specification
Properties Unit Precast
Chemical Composition SiO2 % ≥96.6
Fe2O3 % ＜2
CaO % ≤0.2
Bulk Density g/cm³ ≥1.93
Porosity % ≤16
Cold Crushing Strength Mpa ≥45
Thermal expansion 1000℃ % ≤0.2
Thermal Shock Resistance 1100℃ with water cycles ≥30
Applications
Application of Silica Bricks in Coke Oven

Application of Silica Bricks in Coke Oven
Application of Silica Bricks in Coke Oven

Application of Silica Bricks in Coke Oven
After Repairing Zero Expansion Silica Bricks for Coke Oven Thermal Repair

After Repairing Zero Expansion Silica Bricks for Coke Oven Thermal Repair
After Repairing Zero Expansion Silica Bricks for Coke Oven Thermal Repair

After Repairing Zero Expansion Silica Bricks for Coke Oven Thermal Repair
Silicon Brick Masonry on Coke Oven

Silicon Brick Masonry on Coke Oven
Application of Zero Expansion Silica Brick in Coke Oven Maintenance

Application of Zero Expansion Silica Brick in Coke Oven Maintenance

Online consultation

Thank you for your inquiry! A dedicated representative will contact you shortly to discuss your product quotation in detail and provide tailored solutions.

    captcha

    Recommended products

    Fused Silica Brick for Coke Oven

    Fused Silica Brick for Coke Oven

    SiO2:≧ 99%
    Fe2O3:≦0.3%
    CaO:≦0.1%
    Bulk Density:≧1.85g/cm3
    Apparent Porosity:≦18%
    :524, 525, 526, 527, 506, 523
    Fused Silica Modular Block for Glass Kiln

    Fused Silica Modular Block for Glass Kiln

    SiO2:≧ 96.6%
    Fe2O3:≦2%
    CaO:≦1%
    Bulk Density:≧1.9g/cm3
    Apparent Porosity:≦18%
    :530, 531, 533, 532
    Silica Brick for Coke Oven

    Silica Brick for Coke Oven

    SiO2:≧ 95%(KN) / 95%(KD) / 95%(KS) / 95%(GMD)
    Fe2O3:≤1%(KN) / 1%(KD) / 1%(KS) / 1%(GMD)
    CaO:≤3%(KN) / 3%(KD) / 3%(KS) / 3%(GMD)
    Bulk Density:≥1.8g/cm3(KN) / 1.84g/cm3(KD) / 1.88g/cm3(KS) / 1.9g/cm3(GMD)
    Apparent Porosity:≤24%(KN) / 21%(KD) / 19%(KS) / 15%(GMD)
    :524, 525, 526, 527, 506, 523